Quick Start &
Function Guide
iOS Connection
Guide
1. Turn on
Bluetooth.
2. Open the
earphones and place them near the unlocked phone.
3. Search for the Bluetooth device name and tap to connect.
Android Connection Guide
1. Turn on
Bluetooth.
2. Open the
earphones and place them near the unlocked phone.
3. Search for the
Bluetooth device name and tap to connect.
Ear-to-Ear Touch Controls
Play/Pause/End
call:Tap either left or right ear once.
Next track:Double-tap the right ear.
Previous track:Double-tap the left ear.
Increase volume: Tap
the right ear three times.
Decrease volume: Tap
the left ear three times.
Reject call: Press
and hold for 2 seconds.
Activate voice
assistant:Press and hold for 3 seconds.
Power on/off: Press
and hold for 5 seconds.
Note: On
iPhone, use the button to enter Bluetooth device name customization.
Main Parameters：
Specification | Details |
Chip | JL |
Bluetooth Version | BT 5.3 EDR |
Material | ABS |
Earphone Battery Capacity | 35 mAh (approx.) |
Charging Case Capacity | 250 mAh (with protection board) |
Music Playback Time | 3–4 hours |
Call Time | 2–3 hours |
Standby Time | Up to 100 hours |
Charging Time | About 1 hour |
Charging Cycles | About 3 full charges for both buds |
Reception Range | 15 m (barrier-free) |
Speaker Diameter | 13 mm |
Speaker Impedance | 35 Ω |
Speaker Sensitivity | 100 ± 3 dB |
Bluetooth Protocols | HSP, HFP, A2DP, AVRCP, SPP, PEAP |
Function Description
Basic Functions of
the Earphones
Power On: The
earphones automatically power on and pair when taken out of the charging case.
Power Off: Place
the earphones back into the charging case and close the lid to shut them down
automatically.
Single Ear Use: Open
the charging case, remove one earbud, and it will automatically power on and
connect via Bluetooth.
Auto-Connect: If the
device has not been removed from the phone’s Bluetooth list, simply open the case to reconnect
automatically.