Quick Start & Function Guide
1. iOS & Android Connection
iOS
1. Enable
Bluetooth on your device.
2. Open
the earphones and place them near the unlocked phone.
3. Locate
the Bluetooth device name in the list and tap to connect.
Android
1. Enable
Bluetooth on your device.
2. Open
the earphones and place them near the unlocked phone.
3. Locate
the Bluetooth device name in the list and tap to connect.
2. Left/Right Ear Touch Controls
Play /
Pause: Tap
either ear once
Previous
Track: Double-tap
the left ear
Next
Track: Double-tap
the right ear
Volume
Down: Triple-tap
the left ear
Volume
Up: Triple-tap the
right ear
Voice
Assistant: Press
and hold either ear for 2 seconds
Manual
Power Switch: Press
and hold either ear for 3 seconds to turn on, or 5 seconds to turn off
Answer /
Hang Up: Tap
either ear once to answer; tap again to end the call
Reject
Call: Press
and hold either ear for 2 seconds
Note: On iPhone, press the button to access Bluetooth
device name customization.
3. Specifications
Material: Plastic
Color: White
Bluetooth
Version: V5.3
Bluetooth
Chip: Jerry 6983D2
Earphone
Size: 32.5 ×
23 × 24 mm
Charging
Case Size: 60.5 ×
45 × 22 mm
Speaker
Driver: 13 mm /
32 Ω
Earphone
Battery Capacity: 30 mAh × 2
Charging
Case Capacity: 180 mAh
(with protection circuit)
Transmission
Range: 10 m
(open space)
Standby
Time: Approx.
100 hours
Play
Time: Approx.
5 hours
Earphone
Weight: 3.5 g
(single earbud)
Total
Weight (incl. case): 56 g
Frequency
Response: 50 Hz –
20 KHz
4. Function Descriptions
Basic
Functions of Earphones
1. Power
On: The earphones
will automatically power on and enter pairing mode when removed from the
charging case.
2. Power
Off: Place
the earphones back into the charging case and close the lid to shut them down
automatically.
3. Single
Ear Mode: Open
the charging case, remove one earbud, and it will automatically power on, pair,
and connect via Bluetooth.
4. Auto
Reconnection: If the
earphones remain paired in the phone’s Bluetooth list, they will automatically
reconnect when the charging case is opened.