Please read this manual carefully before use.
Follow the instructions for proper operation, and
keep this manual for future reference.
1.
Appearance Description
① Air Outlet
② Display Screen
③ “+” Key (Increase Speed)
④ “–” Key (Decrease Speed)
⑤ Fan Speed/Battery Level Indicator
⑥ Rear Cover
⑦ Air Inlet
⑧ Type-C Charging Port
⑨ Power Switch
⑩ Lanyard Hole
2.
Precautions Before Use
(1)Before use, check whether the product and power cord are intact and free
from damage. Assemble and operate the unit strictly according to the
instructions.
(2)Before charging, ensure that the input voltage matches the rated value
indicated on the product label.
(3)Do not disassemble, modify, or attempt to repair the product yourself, as
this may cause risks such as electric shock or fire. For repairs, please
contact the original seller or a service center authorized by the manufacturer.
3. Usage
A. Power
On/Off & Wind Speed Adjustment
Toggle
Switch
Push upward to turn on; push downward to turn off.
Wind
Speed Control
“+” Button: Each
short press increases the speed by 20 levels. Five quick presses will increase
the fan from level 1 to level 100.
Long press to activate stepless speed adjustment.
(By default, the fan starts at level 1 when powered
on.)
“–” Button: Each
short press decreases the speed by 20 levels. Five quick presses will reduce
the fan from level 100 down to level 1.
Long press to activate stepless speed adjustment.
Tips
(1)Before operating, push the toggle switch upward to power on the fan.
(2)When storing, slide the toggle switch downward to power off the fan and
prevent accidental activation.
B. Display Status Description
Operation / Status | Display Content |
Power On | Displays the current battery level. After 5
seconds, the display switches to the wind speed level. The default setting is
level 1. |
Adjust Wind Speed | Displays the current wind speed and keeps it on.
During charging, the display automatically returns to charging mode. |
Battery Level Display | (1)When powered on: shows
the current battery percentage, then reverts to wind speed display after 5
seconds. (2)During adjustment: shows
the current wind speed level. (3)At maximum speed:
pressing the “+” key again displays the battery level. (4)At minimum speed: pressing
the “–” key again displays the battery level. (5)After 5 seconds, the
display automatically reverts to the wind speed level. |
Low Battery (Unable to Start) | When the battery icon displays “0,” it flashes 3
times, then the screen turns off. |
Low Battery Reminder | When the battery level is ≤10%, the battery icon
flashes continuously. |
Charging | The battery digits and percentage symbol flash
continuously. |
Fully Charged | When the battery reaches 100%, the display
remains on. After disconnecting the charging cable, the display will
automatically turn off after 10 seconds. |
C.
Product Cleaning
(1)Ensure the power is switched off before cleaning.
(2)The fan cover is non-removable. Clean the fan surface and the air inlet
grille with a clean, dry cloth.
(3)Do not use water or other liquids to clean electrical components (e.g.,
motor, power switch, etc.).
(4)Do not touch the power supply or electrical components with wet hands or
cloths.
4. Specifications
Brand: GOOJODOQ
Model: GFS007
Product Name: High-Speed Pocket Fan
Power: 3.5 W
Battery Capacity: 4000 mAh
Weight: Approx. 152 g
Charging Time: Approx. 2.5 h
Working Time: 3.82–14 h (depending on speed level
and usage conditions)
Product Size: 124 × 60 × 35 mm
Standards: GB4706.1-2005 / GB4706.27-2008
5.
Packaging Accessories
1 × High-Speed Pocket Fan
1 × USB-A to USB-C Charging Cable
1 × Lanyard
1 × Instruction Manual
6. Note
The contents of this manual, including product specifications and technical details, may be subject to change due to product upgrades or improvements, without prior notice. For assistance, please contact the original seller.