Please read this manual carefully before use, follow the instructions precisely, and keep it for future reference.
Appearance Description
1. Display screen 5. Air Inlet
2. Wind outlet 6. TYPE-C charging port
3. + Button 7. Power switch
4. Button 8. Lanyard hole
Precautions
Before Use
1.
Please check whether the product and power cord are damaged, confirm that they
are intact and assemble according to the instructions before powering on.
2.
Before charging the product, please check whether the power voltage used is
consistent with the product label.
3. Do
not disassemble, modify or repair the product privately to avoid accidents such
as electric shock and fire.
For
repairs, please go to the original seller or the service station designated by
the manufacturer to inquire.
Button
Usage
A. Fan power switch/Wind speed switch
Power
switch
Push
the button up to turn on the power; push the button down to turn off the power.
Wind
speed adjustment
+ button:
Short press:
Increases 20 levels each time. 5 presses quickly go from level 1 to 100.
Long
press: Continuously increase the level step by step. (The default setting for
startup is the lowest level 1)
- button:
Each
short: Decreases 20 level each time. 5 presses quickly go from level 100 to 1.
Long
press: Continuously decrease the level step by step.
Warm
tips
1.
Before turning on the fan, push the switch up to turn the fan on.
2. When
storing, you must push the switch down to turn off the fan to avoid
accidentally turning it on.
B. Display status description
Operation/Status | Display content |
Power
on | Display
the current battery level, then switch to the lowest setting (level 1) and
stay on after 5 seconds. |
Adjust
wind speed | Displays
the current wind speed and keeps it on. When charging, it will return to the
charging display state. |
Battery
level display | - Upon
powering on, display the current battery level, then switch to the wind speed
setting after 5 seconds and stay on. - In
the maximum speed setting (level 100), press the + button, or in the lowest
setting (level 1), press the - button, to display the current battery level,
and after 5 seconds, switch to the wind speed setting. |
Low
battery, unable to start | Push
the switch upwards, the battery level will display 0 and the battery level
icon will flash 3 times, then the screen will turn off. |
Low
battery reminder | When the battery level is below 10, the battery icon will keep on flashing. |
Charging | The
ones digit of the battery level value will keep on flashing. |
Fully charged | When the battery is charged to 100%, the
display remains on. When the charging cable is unplugged, the
screen turns off. |
C. Product Cleaning
1. Before cleaning the product, make sure
the power supply has been turned off.
2. The product mask cannot be removed. When
cleaning, you can wipe the fan surface and the air inlet grille with a clean
rag.
3. Do not use water or other liquids to
clean the electrical parts (such as motors, power switches, etc.).
4. Do not touch the power supply and
electrical parts with wet hands or rags.
Product Parameters
Product model: GFS009
Product name: Ultra High-speed Handheld Fan
Product power: 4.5W
Battery capacity: 6000mAh
Product weight: about 315g
Charging time: about 5 hours
Working time: 1-4.5h
(depending on different gears/usage
scenarios)
Product size: 135*75*38mm
Implementation standard: GB4706.1 -2005
GB4706.27-20008
Packing list
Ultra High-speed Handheld Fan*1
USB-A to USB-C charging cable*1
Lanyard*1
Instruction manual*1
Nozzle*2
Storage bag (cloth bag) *1
The contents of this manual and the product
specifications and technical descriptions may be slightly changed with product
upgrades and iterations, and no further notice will be given when changes
occur. If you need help, you can contact the original seller to answer your
questions.