Please read this manual carefully before use, follow the instructions precisely, and keep it for future reference.
Appearance Description
1. Display screen 5. Air Inlet
2. Wind outlet 6. TYPE-C charging port
3. + Button 7. Power switch
4. Button 8. Lanyard hole
Precautions before use
1. Please check whether the product and power cord are damaged,
confirm that they are intact and assemble according to the instructions before powering
on.
2. Before charging the product, please check whether the power voltage
used is consistent with the product label.
3. Do not disassemble, modify or repair the product privately to avoid
accidents such as electric shock and fire.
For repairs, please go to the original seller or the service station designated
by the manufacturer to inquire.
Button Usage
A. Fan power switch/Wind speed switch
Power switch
Push the button up to turn on the power; push the button down to turn
off the power.
Wind speed adjustment
+ button:
Short press: Increases 20 levels each time. 5 presses quickly go from level 1 to 100.
Long press: Continuously increase the level step by step. (The default setting for startup is the lowest level 1)
- button:
Each short: Decreases 20 level each time. 5 presses quickly go from level
100 to 1.
Long press: Continuously decrease the level step by step.
Warm tips
1. Before turning on the fan, push the switch up to turn the fan on.
2. When storing, you must push the switch down to turn off the fan to avoid accidentally turning it on.
B. Display status description
Operation/Status | Display content |
Power on | Display the current battery level, then switch to the lowest setting
(level 1) and stay on after 5 seconds. |
Adjust wind speed | Displays the current wind speed and keeps it on. When charging, it
will return to the charging display state. |
Battery level display | - Upon powering on, display the current battery level, then switch
to the wind speed setting after 5 seconds and stay on. - In the maximum speed
setting (level 100), press the + button, or in the lowest setting (level 1),
press the - button, to display the current battery level, and after 5
seconds, switch to the wind speed setting. |
Low battery, unable to start | Push the switch upwards, the battery level will display 0 and the
battery level icon will flash 3 times, then the screen will turn off. |
Low battery reminder | When the battery level is below 10, the battery icon will keep on flashing. |
Charging | The ones digit of the battery level value will keep on flashing. |
Fully charged | When the battery is charged to 100%,
the display remains on. When the charging cable is unplugged,
the screen turns off. |
C. Product Cleaning
1. Before cleaning the product, make sure
the power supply has been turned off.
2. The product mask cannot be removed.
When cleaning, you can wipe the fan surface and the air inlet grille with a
clean rag.
3. Do not use water or other liquids to
clean the electrical parts (such as motors, power switches, etc.).
4. Do not touch the power supply and
electrical parts with wet hands or rags.
Product Parameters
Product model: GFS010
Product name: Mini Water Pipe High-speed
Fan
Product power: 4.5W
Battery capacity: 3000mAh
Product weight: about 168g
Charging time: about 2.5-3 hours
Working time: 2-6.5h
(depending on different gears/usage
scenarios)
Product size: 145*65*39.5
mm
Implementation standard: GB4706.1 -2005
GB4706.27-2008
Packing list
Mini High-speed Fan x1
USB-A to USB-C charging cable x1
Lanyard x1
Instruction manual x1
The contents of this manual and the
product specifications and technical descriptions may be slightly changed with
product upgrades and iterations, and no further notice will be given when
changes occur. If you need help, you can contact the original seller to answer
your questions.